It is also the right choice in case of use as FOH system, acting both as a full-range or as bi-amped speaker. In the latter case, in order to avoid damage to components, make sure that the power amplifier (like dBTechnologies HPA3100) delivers a power consistent with the technical specifications reported on the next page. Furthermore, the cut-off frequency woofer/driver must be set by a loudspeaker management system (like dBTechnologies AC26N) according to the product specifications, so that you can get the best sound without risk of damage to the driver. However consider that the thermal protection (PTC) always remains active in both full-range or bi-amp configuration.
Speaker Type | 2-Way Passive Speaker |
| |
RMS Power | 1000 W/RMS |
Impedance | 4 Ohms |
Frequency Response [+/- 3dB] | 60 - 20.000 Hz |
Max SPL | 136 dB |
HF | 1.4 “ |
Voice Coil HF | 2.5 “ |
Driver Protection | PTC |
Directivity | 60x40 ° |
Horn | CD Horn Aluminium |
Crossover Frequency (passive) | 1300 Hz |
LF | 2x15 “ |
Voice Coil LF | 3 “ |
| |
Signal Input | 1x Speakon (Pin 1+=+) (Pin 1-=-) |
Signal Output | 1x Speakon (Pin 1+=+) (Pin 1-=-) |