2011A - Studio Condenser - Digital Media Technology Co.

Product Details

2011A

A combination of the MMC2011 Microphone Capsule and the MMP-A Preamplifier, this mic is part of d:dicate™ Recording Microphone series.

Product Details

A combination of the MMC2011 Microphone Capsule and the MMP-A Preamplifier, this mic is part of d:dicate™ Recording Microphone series.

Attenuation Pad
The MMP-A Preamplifier has a 20 dB attenuation pushswitch at the XLR connector. Use a pencil or the like to activate the attenuator and lower the output by 20 dB.

Technical Specification

Weight	160 g (5.6 oz)
Connector	XLR-3M. Pin 1
"Directional pattern	Cardioid
Principle of operation	Pressure gradient, with interference tube
Cartridge type	Pre-polarized condenser, Twin Diaphragm Capsule
Frequency range	20 Hz - 20 kHz
Output impedance	< 200 Ω
Current consumption	2.8 mA
Polarity	+V at Pin 2 for positive sound pressure
Sensitivity, nominal, ±2 dB at 1 kHz	10 mV/Pa; -40 dB re. 1 V/Pa
Output balance principle	Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)	> 60 dB
Power supply	48 V Phantom power (±4 V for full specifications)
Operating temperature range	-40 to 45°C (-40 to 113°F)
Relative humidity	Up to 90%
Switchable attenuator	0 dB / -20 dB