2x 64 MADI In + 2x 64 MADI Out via BNC port
The DD4MR-FX is a digital I/O interface for the OPTOCORE optical digital network. It provides 4 BNC coaxial MADI input and output ports, allowing transmission of up to 128 input and output audio channels. The unit can also integrate with SANE CAT5 digital networks, composite video, 100MBit Ethernet as well as wordclock and serial data ports and has dual redundant PSUs
The DD4MR-FX is equipped with two SANE ports, which enables the device to send and receive up to 256 audio channels via standard CAT5 cable. SANE ports can be used to send Ethernet data as well. DD4MR-FX is also equipped with two separate LAN ports for Ethernet transmission. DD4MR-FX unit can be used as a bridge between fiber Optocore network and CAT5 SANE.
OPTOCORE CONTROL provides easy access to all configuration and control tools, including routing, naming, storage and recall of configurations on the computer, off- and online mode with real-time level display.
• 2 x BNC coaxial MADI inputs and 2x BNC coaxial MADI outputs
• Up to 128 inputs and 128 output MADI channels
• Up to 128 inputs and 128 output SANE channels
• 2 x 100Mbit Ethernet ports
• Four RS485 interfaces for the exchange of control data. (e.g. RS422, RS485, DMX, MIDI)
• Wordclock input and output
• Composite video input and output
• 2x optical 2Gbps LINK interface with duplex LC- connectors
• Dual powersupply with automatic switchover
• USB, RS232 or LAN port for configuration and control
• Full remote access with OPTOCORE CONTROL software
• Upgradeable internal logic
• Comprehensive status control via LED banks on the front